Design modular ruined walls and period props for 28–32 mm tabletop games, then download a print-ready STL. Free, runs in your browser, nothing to install.
Free · STL · FDM & resin
Building…
Size (mm)–
Triangles–
Mesh–
Piece
Period props
Props sit next to the ruins: same scale, same print-friendly shapes. The cart and well print best with tree supports or in resin.
Size
normal
Ruin
50%
Base
Straight walls only. Lengths snap to 2″ steps (50.8, 101.6, 152.4, 203.2 mm); the 12.7 × 7 mm base has the clip ports on the front face. Base geometry from the official OpenLOCK templates by Printable Scenery (CC BY‑NC 4.0): free to print and share, not for sale. Clips: OpenLOCK templates & clip. Print a test piece first.
How to print
Print standing up, as exported. No supports needed for walls; the arch tops bridge fine.
FDM: 0.12–0.16 mm layers, 0.4 mm nozzle, 3 walls. Resin: print flat on the plate, no hollowing needed.
Magnet holes have 0.3 mm of play: press-fit or add a drop of glue.
OpenLOCK bases: print flat as exported, no supports needed. Print one piece and test it with your clips before printing a whole set.
Modular by design
Straight walls end flush, so a 100 mm and two 50 mm pieces line up. Corners and pillars use the same thickness and base strip, so a table can be built from a handful of pieces.
Your prints, your rules
Everything you generate is yours to print for personal use and for your games. Original designs only: no copyrighted factions, symbols or logos.
Ruined City Starter Set
Sixteen pieces designed to work together: straight walls, corners, T‑junctions, pillars, floor tiles and rubble, in brick and stone, each with and without magnet holes. Print guide included.